STEP 1
Ensure surfaces are clean and dry. Lay product flat so you can see from above.
STEP 2
Lay the decal on a flat surface and remove any air bubbles by using a soft cloth or plastic card.
STEP 3
Peel the paper backing from the decal sticker. If the sticker clings to the backing, gently replace and repeat the previous step.
STEP 4
Apply decal and transfer sticker onto the pre-prepared surface and smooth down using cloth or plastic card.
STEP 5
Starting from a corner, slowly peel the transfer sticker away from the decal at an angle. If the decal lifts away from the surface, replace and repeat step 4.
GLITTER SURFACES
GLITTER/ROUGH SURFACE ONLY*: Spray lightly and evenly with adhesive spray. SPRAY ONLY WHERE NEEDED.